Bug #469

RST#, BL lines should have pulldown as appropriate

Added by Andrew Kohlsmith over 6 years ago. Updated over 6 years ago.

Status:FeedbackStart date:03/01/2014
Priority:NormalDue date:
Assignee:Andrew Kohlsmith% Done:


Target version:-


Just from a “nice to have” perspective, RST# and BL are the only two signals that don’t have a defined state when not being driven. They should both be pulled low so that the board’s native state is to have a dark, in-reset LCD. This would give the cleanest power-up.


#1 Updated by Andrew Kohlsmith over 6 years ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 80

Applied in changeset nanov6|commit:dd7a3538aadc34740b98c8baf41020457301695f.

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 1 GB)