Bug #440

LED current limit resistors

Added by Andrew Kohlsmith almost 6 years ago. Updated over 5 years ago.

Status:NewStart date:10/01/2013
Priority:NormalDue date:
Assignee:-% Done:

0%

Category:-
Target version:-
Duration:

Description

The LED current limit resistors are all 100 ohms in the BOM; this is fine for 1.8V but they should be changed for the other voltage options.

History

#1 Updated by Andrew Kohlsmith over 5 years ago

A better solution would be to drive the LEDs low and supply power to them from the +VUSB which is always 5V.

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 1 GB)